Connecting To The Monitor Output Terminal ( T); Connecting To The Component Video Input Terminal - Sony KV-SW292M91K Operating Instructions Manual

continued
Connecting to the monitor output terminal ( T )
TV rear panel
R
1

Connecting to the component video input terminal (

TV rear panel
R
1
Notes
• If your DVD player can output interlace and progressive mode signals, select the interlace
output when connecting to
either 525i/60Hz or 625i/50Hz interlace signals.
• The component video terminals on your DVD player are sometimes labeled Y/C
P Y/C /C or Y/B-Y/R-Y.
R, b r
• If you select "DVD" on your TV screen, the signal from the T (monitor output) jacks will not
be output properly. This does not indicate a malfunction.
24
Additional Information
L Y C C
R
B
3 4
L Y C C
R
B
3 4
(component video input) on your TV. Your TV can receive
Audio/Video cable
(not supplied)
Component
video cable
(not supplied)
Audio cable
(not supplied)
Audio system
VCR
)
DVD player
/C Y/P /
B R, B