Notes
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a VCR to the ˘ (antenna) terminal, preset the signal
• Do not have concurrent connections of video equipment to the ... 3 (video
• When both the
Step 2
Insert the batteries
into the remote
Note
• Do not use old batteries or different types of batteries together.
Step 3
Preset the channels automatically
2
AUTO
PROGR
Tip
• To stop the automatic channel presetting, press MENU twice.
Now You Are Ready. . .
The channels are now automatically preset
in your TV. To preset the channels manually,
see page 37.
yellow jack) and the black plug to
output from the VCR to the program number 0 on the TV.
input) jacks at the front and the ... 3 (video input) jacks at the rear of your
TV; otherwise, the picture will not be displayed properly on the screen.
(S video input) and ... 1 (video input) are connected,
the
(S video input) is automatically selected. To view the video input
to ... 1 (video input), disconnect the S video cable.
AU TO PROGRAM
PR :
0 1
T V S Y S : AU TO
VH F L OW
-L (MONO) (the white jack).
1
ONE-PUSH AUTOMATIC PROGRAMMING
Using Your New TV
(the
1
5