Advertisement
Bosean Electronic Technology Co.,Ltd
4.6 Alarm information
The following table shows the details of each alarm:
Tel:86-371-86533226
Fig17
5.
Low alarm setting
Enter "LA set" menu, use ▲ to adjust the cursor, use
▼ to adjust the value, choose the right value and
press "SAVE". then it will return the normal detecting
interface
Fig18
requirement, please do not revised alarm value.
6.
High alarm setting
The setting is same as low alarm setting. Note: High
alarm value never lower than low alarm value. If no
special requirement, please do not revised alarm
value.
7.
Unit set
Enter "Unit set" function show as Figure 19, choose
the suitable unit and save it. Note, this function can
be used on the PPM unit gas.
Fig19
8.
ESC
Under the menu function interface, choose ESC,
press
Fig20
9.
Turn off
Under the menu function interface, choose "Turn off",
press ▲ to turn off, press ▼ to return normal
detecting interface.
Fig21
- 7 -
show as
Figure
to return normal detecting interface.
Email:
sales@bosean.com
www.bosean.com
18.
If
no
special
Advertisement
