Advertisement
Bosean Electronic Technology Co.,Ltd
4. Operation & Function
4.1 Display Elements
CO
Gas type
Full voltage
25.5 ℃
Temperature
4.2 Push buttons
Push button
▼▲
4.3 Turn on
Press the button
Testing", and then vibrates with "Motor Testing", then beep and flashes with "Sound and
Alarm Testing", shows low alarm value, high alarm value, detecting range, it enters into
detecting status.
At this time, it displays the concentration of gas in the environment as figure 1.
Fig 1
Tel:86-371-86533226
CO
0
25.5 ℃
10:45
To active the detector, press and hold it for 5 seconds
Press it to cancel the the operation;
To deactive the detector, press and hold it for 5 seconds
Press it to set up the parameters
Can check parameters, alarm record, low alarm, high alarm, zero
calibration, calibration,time set.
for 5s and then release it. The interface shows "Starting", "LED
CO
0
25.5 ℃
10:45
ppm
10:45
Time
ppm
Concentration value
Description
ppm
- 3 -
Email:
www.bosean.com
sales@bosean.com
Advertisement
