Table of Contents
Advertisement
14
en | Installation
•
If these requirements cannot be guaranteed, the device must be regularly serviced to prevent
any outages that could occur as a result of negative ambient conditions. If a solid object or
fluid enters the housing, immediately disconnect the device from the voltage supply, and have
it serviced by an authorized technician before it is recommissioned.
Warning!
!
The maximum ambient temperature of +45 °C should not be exceeded.
Standby mode
In standby mode, the power consumption of the device significantly reduces. In standby
mode, the following functions are still available:
•
•
•
Standby operation is activated via the CAN bus and indicated by the Standby indicator light.
18-Jun-2015 | 03 | F01U306895
Strong vibrations
Remote control via the CAN bus
Monitoring of the DC input
Function of the Control Port
Operation manual
Promatrix 6000 Router
Advertisement
Table of Contents
