Dynacord Promatrix 6000 Operation Manual page 10

10 en | System overview
Number Symbol
18-Jun-2015 | 03 | F01U306895
Element
3 Recessed button
4 Network indicator
light
5 Standby indicator
light
6 Power indicator
light
Operation manual
Description
The button is protected to prevent it from being
pressed accidentally. Use a pointed object (such
as a ballpoint pen) to press the button.
This button has the following functions if the CAN
address of the device is not set to 00:
• Find function: If the find function of the
device is activated, press this button to
deactivate the indicators.
• Displaying the CAN baud rate: Press this
button for at least one second. Please refer to
section Displaying the CAN baud rate, page
25.
• LED test: Press this button for at least three
seconds to activate the LED test. All
indicators at the front panel light up as long
as the button is pressed.
This button has the following functions if the CAN
address of the device is set to 00:
• Resetting a fault (e.g. watchdog fault): Press
the button briefly to confirm a fault.
• Setting/displaying the CAN baud rate: Press
this button for at least one second. Please
refer to section Configuring the CAN baud rate,
page 25.
• Resetting to delivery condition: Press this
button for at least three seconds. Please refer
to section Resetting to factory default settings,
page 29.
This indicator lights up green if successful data
communication has been established.
This indicator lights up green when the device is in
standby mode.
This indicator lights up green when the power
supply is OK.
Promatrix 6000 Router