Table of Contents
Advertisement
SAR tests are conducted using standard operating
positions accepted by the FCC with the device
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined
at the highest certified power level, the actual SAR level
of the device while operating can be well below the
maximum reported value. This is because the device is
designed to operate at multiple power levels so as to
use only the power required to reach the network. In
general, the closer you are to a wireless base station
antenna, the lower the power output of the device.
Before a new model device is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the SAR limit established by the FCC.
Tests for each model phone are performed in positions
and locations (e.g. at the ear and worn on the body) as
required by the FCC. For body-worn operation, this
device has been tested and meets FCC RF exposure
guidelines when used with an accessory that contains
no metal and that positions the mobile device a
minimum of 1.5 cm from the body. Use of other
accessories may not ensure compliance with FCC RF
exposure guidelines. The FCC has granted an Equipment
Authorization for this mobile device with all reported
SAR levels evaluated as in compliance with the FCC RF
exposure guidelines.
This device has a FCC ID number: A3LSMJ320A
[Model Number: SM-J320A] and the specific SAR levels
for this device can be found at the following FCC
website: www.fcc.gov/oet/ea/.
The SAR information for this device can also be found on
Samsung's website: www.samsung.com/sar
SAR information on this and other model devices can be
accessed online on the FCC's website through
http://transition.fcc.gov/oet/rfsafety/sar.html. To find
information that pertains to a particular model, this site
uses the device FCC ID number which is usually printed
somewhere on the case of the device. Sometimes it may
Health and Safety Information
3
Advertisement
Table of Contents
