Table of Contents
Advertisement
2. VIDEO DISPLAY BOARD
This is the signal inside the PDP and audio device disposition.
1) It can receive composite signal including R.G.B.H.V. contrast
signal, DVI digital signal, AV color distinction signal and
S-Video.....etc.
R.G.B.H.V. & Y Pb Pr :The signal is input from (15 PIN) J1 & J1
DVI : Digital signal is input from P1 the managed by U6 and passed
to U29 ,the signal is passed to U33 for the output of visual
signal output.
AV & TV : AV& TV signal enters from J12 & JP18 to U46 to
perform signal, then transform to U47 to decode perform
signal , then transform to U49 to deinterlace perform signal
and enter to U29 , the signal passed to U33 for the output
of visual signal.
S-Video : S-Video signal input from J12 to U47 to decode perform
signal ,then transform to U49 to deinterlace preform
signal and enter to U29 , the signal passed to U33 for the
output of visual signal.
to U5 for visual production and after deposition, it will pass
to U7 for signal compensation and to U9 for visual signal
deposition output.
2) Audio is input from J3, J8 and from U62 to perform
pre-production. Then, the audio signal is passed to U61 SRS process
for the signal output by J4 and J9.
3) When audio signal the J4 passed to Amplify for the final output.
All manuals and user guides at all-guides.com
to U6 to perform contrast signal ,then
transform to digital signal and enter to U29 ,
the signal is passer to U33 for the output of
visual signal.
8
Advertisement
Table of Contents
