Advertisement
Figure 1
Commissioning
Assembly
1. Take the two parts of the stirrer out of the box (see Fig. 1).
2. Connect the two parts (see Fig. 2).
3. Tighten them with a wrench (see Fig. 3).
4. Place the stirrer on the discharge shaft (see Fig. 4).
5. Tighten the screw of the stirrer (see Fig. 5).
Figure 1
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Figure 2
Figure 4
Item 62354
Figure 2
Figure 3
Figure 5
Page 7
04 2021-1
Advertisement
