Advertisement
Do not stoop down too much and always make sure that you are able to maintain your bal-
ance and a firm and secure stance. Balance and a secure stance allow better control of the
power tool in unexpected situations.
If devices for connecting de-dusting and extraction systems are provided, make sure that
these have been connected before starting work and that they are working properly. The use
of such devices can reduce the hazards caused by dust.
Do not mix any substances with a flash point below 21
wise ignite them.
Safety while using and maintaining
The power tool must not be used forcibly. Always use the right tool for the job at hand. Tools
and equipment are safer and more reliable when used for the work for which they are inten-
ded.
Do not use a device whose switch is defective and cannot be switched on or off properly. Any
device that cannot be controlled by the switch is dangerous and must be repaired immedi-
ately.
Pull the power plug before changing settings, accessories, performing maintenance work, or
preparing the device for storage. This safety precaution reduces the risk of unintentional
switching on.
Always store unused power tools out of the reach of children and do not allow them to be used
by people who are not familiar with them. Devices and tools are dangerous when used by in -
experienced people.
Always maintain equipment and tools very carefully. Always keep cutting tools sharp and
clean. Properly maintained tools with sharp edges are less prone to deformation and easier to
control. Any change or modification represents incorrect use, which increases the risk of acci-
dents considerably.
Before each use, check the power tool for defective or worn parts, and pay particular attention
to possible deformations and misalignments of moving parts. If the device is damaged, have it
repaired immediately by qualified personnel. Many accidents occur due to poorly maintained
equipment and tools. Creating a maintenance schedule can help extend the life of a power
tool.
Always use the power tool, accessories, attachments, etc. in accordance with these instruc-
tions and in the manner intended for the respective power tool type, taking into account the
working conditions and the work to be performed. Using the power tool for work for which the
device is not intended increases the risk of accidents considerably.
Always wear hearing protection when using this power tool to prevent possible hearing loss.
Only hold the power tool by the insulated gripping surfaces during use when performing work
in which the power tool may come into contact with hidden wiring or its own power cord. Ac -
cessories that come into contact with a live line can also make exposed metal parts of the
power tool live, which can lead to an electric shock.
Safety while repairing and cleaning
Repair work may only be carried out by qualified personnel. A repair by unqualified persons in-
creases the risk of accidents, because internal wires, for example, can be incorrectly laid or
jammed or return springs of the protective device can be improperly installed.
Be careful when using cleaning agents and solvents as gasoline, carbon tetrachloride, ammo-
nia, and chlorinated or ammonia-containing household cleaners can severely damage the
plastic parts of the tool.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
℃
, as the mixing process could other
Item 62354
-
Page 5
04 2021-1
Advertisement
