Table of Contents
Advertisement
6 Insert the new memory module in the slot:
a Push the retaining clips on the slot out to the sides.
b Align the notch on the gold edge of the module with the notch in the memory slot.
c Push down on the memory module with firm and even pressure. The retaining clips will snap into position as
the module is correctly inserted.
Note:
Hold the memory module by its edges, and do not touch the gold connectors.
Important:
You must install the memory module onto the blue slots first. Please refer to the sticker (as below) on the
ventilation duct cover.
10 Chapter 2: Hardware Setup
Advertisement
Table of Contents
