Panasonic KX-FC255CX-S Service Manual page 172

KX-FC255CX-S
15.1.2.2. Batch Files Settings
Note:
• "****" varies depending on the country.
• See the Command (P.172) for frequently used commands.
15.1.2.3. Command
command
readid
writeid ** ** ** ** **
rdeeprom ** ** **
wreeprom ** ** ** **
eeprom_fc_init
getver
conttx
15.1.3. How to Adjust
15.1.3.1. In Case of EEPROM Replacement
Note:
• "****" varies depending on the country.
• See the Frequency and Voltage Adjustment (P.173).
read ID number of Base unit
write ID number of Base unit
**: ID number, example if ID number is 007B700000, input 00 7B 70 00 00
read EEPROM with address
1st, 2nd **: Address you want: example: if you want to read address 0010, input 00 10.
3rd ** data length: example: if you want to read 10 datas from address ** **, input 10.
write EEPROM with address
1st, 2nd **: Address you want: example: if you want to write to address 0010, input 00 10.
3rd ** data length: example: if you want to write 2 datas from address ** **, input 2.
4th ** data example: if you want to write datas "01" from address ** **, input 01.
initialize EEPROM: default vales are written to EEPROM
get Version of BBIC software: you can check Version.
output RF CLK continuously
172
function and how to use