Sony KDL-40Z5800 Instruction & Operation Manual page 118

OSIM | Project: EG2L | Resolution-Width: 960 | Resolution-Height: 540 | Language: English UK
Analogue Set-up
5 Press to select "Channel", then press
6 Press to select "S" (for cable channels) or
"C" (for terrestrial channels), then press
7 Tune the channels as follows:
If you do not know the channel number
(Frequency):
Press to search for the next available
channel. The search stops when a channel is
found. To continue searching, press
If you know the channel number (Frequency):
Press the number buttons to enter the channel
number of the broadcast you want to tune, or
the channel number of your VCR.
Previous
Select
118/ 139 | File AQUA_Paprika_OSIM_GBUK_090923.fm | Created at March 19, 2008 | Modified at September 28, 2009 3:17 pm
.
.
.
Next
8 Press to jump to "Confirm", then press
Repeat the above procedure to preset other
channels manually.
• Label: Assigns a name of your choice to the
selected channel. This name appears briefly on
the screen when you select the channel.
To input characters, follow steps 2 to 4 in
"Programme Labels" (116).
• AFT: Allows you to fine-tune the selected
channel manually if you feel that a slight
tuning adjustment may improve picture quality.
When "On" is selected, fine tuning
adjustments are made automatically.
Use this function ANASETUP
<auto-generated>
.
Table of Contents
Back