Table of Contents
Advertisement
bjanott,
Fold the wiper arms away from the wind-
X
screen.
Clean the wiper blades carefully with a
X
damp cloth.
Fold the wiper arms back again before
X
switching on the ignition.
Cleaning the headlamps
Clean the plastic lenses of the headlamps
X
with a wet sponge and windscreen washer
fluid or cleaning cloths.
! Only use washer fluid or cleaning cloths
suitable for plastic lenses. Unsuitable
washer fluid or cleaning cloths could
scratch or damage the plastic lenses of the
headlamps.
Cleaning the sensors*
Clean sensors : for the driving systems
X
with water, car shampoo and a soft cloth.
! If you clean the sensors using a high-pres-
sure cleaner or steam cleaner, observe the
manufacturer's information on maintaining
the correct distance between the vehicle
and the high-pressure cleaner.
* optional
Version: 2.11.7.7
Cleaning the reversing camera*
Use clear water and a soft cloth to clean
X
camera lens :.
! Do not clean the camera lens and the area
around the reversing camera with a high-
pressure cleaner.
Cleaning the exhaust tail pipes
Impurities combined with the effects of road
grit and corrosive environmental factors may
cause flash rust to form on the surface. Reg-
ular care of the exhaust tail pipes will ensure
that their original shine is restored.
! Do not clean the exhaust tail pipes with
alkaline-based cleaning agents such as
wheel cleaner.
Clean the exhaust tail pipes with a chrome
X
care product approved by Mercedes-Benz.
Trailer coupling*
The ball coupling must be cleaned if it
becomes dirty or corroded.
Remove any rust using a wire brush.
X
Remove dirt with a clean, lint-free cloth or
X
a brush.
! Do not clean the ball coupling with a high-
pressure cleaner. Do not use solvents.
Care
335
Z
Advertisement
Table of Contents
