Table of Contents
Advertisement
bjanott,
Setting a departure time
Press the X or Y button repeatedly until the
X
time to be changed appears in the display.
Press the ON and OFF buttons simultane-
X
ously.
The Î symbol in the remote control dis-
play flashes.
Press the X or Y button to set the desired
X
departure time.
i
The longer you press the X or Y button,
the faster the time changes.
* optional
The auxiliary ventilation
is switched on. The num-
ber in the display shows
the remaining time (in
minutes) for the auxiliary
ventilation.
The auxiliary heating is
switched on. The number
in the display shows the
remaining time (in
minutes) for the auxiliary
heating.
A departure time has
been activated. The
departure time appears
in the display.
A departure time has
been activated. The aux-
iliary ventilation is cur-
rently selected. The
departure time appears
in the display.
A departure time has
been activated. The aux-
iliary heating is currently
selected. The departure
time appears in the dis-
play.
Version: 2.11.7.7
Air conditioning
Press the ON and OFF buttons simultane-
X
ously.
The new departure time is stored.
Activating a set departure time
Press the X or Y button repeatedly until the
X
desired departure time appears in the dis-
play.
Press the ON button.
X
The Í symbol and the departure time
appear in the display.
Deactivating a set departure time
Press the X or Y button.
X
The status of the auxiliary heating is shown
in the display.
Press button Y.
X
The first departure time stored appears in
the display.
Press the OFF button.
X
The display message OFF appears in the
display.
Activating/deactivating the heater
booster function*
The heater booster function helps the engine
to reach its operating temperature faster dur-
ing its warm-up phase, as well as helping to
heat the vehicle interior faster. The heater
booster function switches on when outside
temperatures are low and the coolant tem-
perature is less than 70 †. You can also acti-
vate the heater booster manually.
289
Z
Advertisement
Table of Contents
