Setting The Date/Time - Canon PowerShot A5 Reference Manual

Changing the Button Battery and Setting the Date/Time continued....3/3

Setting the Date/Time

Follow the procedures below to set the date/
time once you have changed the button
battery.
• The Clock Not Set message
continue to flash on the Display Panel
until you set the date/time, even if
you have changed the button
battery. Always set the date/time
after changing the button battery.
1. Turn the Mode Dial to the
position.
2. Press the MENU Button.
3. Use the +/- Buttons to select Setup and
press the SET Button.
60
will
4. Use the +/- Buttons to select Date/Time
5. Use the SET Button to move between
(Auto)
6. Press the Menu button when you finish
7. Turn the Mode Dial to the L (Lock)
and press the SET Button.
fields and the +/- Buttons to change the
values to the appropriate settings.
adjusting the settings.
position.