Taking Pictures In Stitch Assist Mode; Buttons Available In Stitch Assist Mode; Retaking A Picture; When A Sequence Is Complete - Canon PowerShot A5 Reference Manual

Taking Pictures in Stitch Assist Mode

Set the Mode Dial to the
position and follow the procedures below to
merge several images into one large pano-
ramic scene. In Stitch Assist mode, images can
be shot in horizontal, vertical or 2x2 (matrix)
sequences.
Buttons Available in Stitch Assist
Mode
Flash Button
The Auto, Red-Eye Reduction, Flash On and
Flash Off modes can be set with this
button.
Macro Button
The Macro mode for shooting photo-
graphic subjects 9 to 50 cm distant from
the lens can be set with this button.

Retaking a Picture

• In this mode, repeatedly pressing the +
Button enables you to scroll through the
36
(Stitch Assist) images to confirm the current merge
sequence and to retake an image if
required.
• To retake an image in a horizontal or
vertical sequence, press the + Button to
return to the previous image and take
the shot. Press the + Button again to
return to the original image.
• To retake an image in a 2x2 (matrix)
sequence, press the + Button to advance
to any image that you wish to replace
and take the shot.

When a Sequence is Complete

• When you have completed shooting a
sequence, press the SET Button to return
to the Stitch Assist menu.
• To exit Stitch Assist mode, turn the Mode
Dial to another setting, such as the L
(Lock) Position.