KMART 42909200 Assembly Instructions page 2

STEP 1
Fx24
Ex6
Attach board 2 onto board 1 with part E & F into the
corresponding position as per diagram.
STEP 2
B
C
A
D
Fixed leg3 onto board 1 with part B,C & A by hand, then tighten them using Part D.
STEP 3
Peel off self-adhesive tape of Glide G, stick them on the bottom of each leg .
STEP 4
If you want to extend table top, push block of board 1 onto board 2 into the corresponding
position as per diagram.
G