Mercedes-Benz B-Class 2011 Owner's Manual page 96

Automatic anti-dazzle mirrors
G
WARNING
If incident light from headlamps is prevented
from striking the sensor in the rear-view mir-
ror, for instance, by luggage piled too high in
the vehicle, the mirror's automatic anti-dazzle
function will not operate.
Incident light could then blind you. This may
distract you from the traffic conditions and,
as a result, you may cause an accident.
The rear-view mirror and the exterior mirror
on the driver's side automatically go into anti-
dazzle mode if the ignition is switched on and
incident light from headlamps strikes the sen-
sor in the rear-view mirror.
The mirrors do not go into anti-dazzle mode if
reverse gear is engaged or if the interior light-
ing is switched on.
Parking position for the exterior mir-
ror on the front-passenger side
Setting and storing the parking position
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. You can store this posi-
tion.
Make sure that the vehicle is stationary and
X
that the key is in position 2 in the ignition
lock.
Press button ; for the exterior mirror on
X
the front-passenger side.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use adjustment button = to adjust the
X
exterior mirror. You should see the rear
wheel and the kerb in the exterior mirror.
The parking position is stored.
i
If you shift the transmission to another
position, the exterior mirror on the front-
passenger side returns to the driving posi-
tion.
i
You can also store the parking position
using memory button M ?.
Make sure that the key is in position
X
2 in the ignition lock.
With the exterior mirror on the front-
X
passenger side activated, use adjust-
ment button = to adjust the exterior
mirror. You should see the rear wheel
and the kerb in the exterior mirror.
Press memory button M ? and one of
X
the arrows on adjustment button =
within three seconds.
The parking position is stored if the
exterior mirror does not move.
If the mirror moves out of position, repeat
the steps.
Calling up a stored parking position set-
ting
Turn the key to position 2 in the ignition
X
lock.
Adjust the exterior mirror on the front-
X
passenger side with the corresponding but-
ton ( page 91).
Y
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
Mirrors
93
Z