Mercedes-Benz B-Class 2011 Owner's Manual page 203

Menus and submenus
200
Press a.
X
The current selection is displayed.
Press the a button to confirm.
X
Press : or 9 to set Off,
X
or Adaptive.
Press the a button to save the setting.
X
If Lane Keeping Assist is activated
( page 180) and the ignition is switched on,
Y
the à symbol appears in the multifunction
display.
Service menu
In the Service
options:
call up display messages (
R
restarting the tyre pressure loss warning
R
system ( page 297)
Y
calls up when a service is due
R
( page 266)
Y
Settings menu
Introduction
In the Settings
options:
change the instrument cluster settings
R
change the light settings
R
change the vehicle settings
R
Standard
menu, you have the following
page 205)
Y
menu, you have the following
change the convenience settings
R
restore the factory settings
R
Instrument cluster
Selecting the unit of measurement for dis-
tance
You can determine whether the multifunction
display shows some messages in miles or kil-
ometres.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Inst. cluster submenu.
Press the a button to confirm.
X
Press the : or 9 button to select the
X
Display unit Speed-/odometer:
tion.
You will see the selected setting:
miles.
Press the a button to save the setting.
X
The selected unit of measurement for dis-
tance applies to:
the digital speedometer in the
R
the total distance recorder and the trip
R
meter
the trip computer
R
the current consumption and the range
R
the navigation instructions in the
R
menu
cruise control
R
SPEEDTRONIC
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
R
Switching the additional speedometer
on/off
Only vehicles with manual transmission have
this function.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Inst. cluster submenu.
Settings menu.
func-
km or
Trip menu
Navi
Settings menu.