Table of Contents
Advertisement
Always operate vacuum with genuine Panasonic Type U3 Standard, U6 Electrostatic or U10
HEPA dust bags installed. Panasonic dust bags may be purchased through any authorized
Panasonic dealer or ordered from service company.
Groove
Ouverture
Ranura
Changing Dust Bag
1)
2)
3)
4)
5)
6)
- 24 -
Pull outward on dust cover grip to
remove the dust cover.
Remove dust bag by grasping
cardboard portion and pulling out.
Spread out new dust bag, taking care
not to tear bag.
Attach new dust bag onto bag holder
by holding cardboard portion and
pushing back.
Reinsert tab on end of dust cover
into groove on dust compartment to
allow cover to rotate closed.
Rotate dust cover up into closed
position and press into place without
pinching dust bag.
Advertisement
Table of Contents
