Advertisement
1）Insert the Top Pole (A) into the plastic
connectors (B) like below.
A
B
C
2）Slide poles into sleeves of the teepee fabric,
one by one making sure that the holes are
positioned at the top of the teepee.
3）With the white loose string,
loop though each holes in order.
4）Pull the string taut. With the string attached
5）Spread the bottom corners out until
6）Last tie the white string
into a knot to secure poles.
Page 2 of 2
to the tent, tie this around the white string
in between the second and third pole.
D
they are fully extended.
①. Pinch a bow on left and right side.
②. Pull the 2 bow cross.
③. Pull and Pluck. Pull the long side over
the bow and then pluck both sides of
the bow together.
④. Tie tension in avoid the bow loosen.
①
③
E
②
④
Advertisement
