Sleep Mode; Operation Of Touch Panel - ProScan PLT7044K User Manual

User Manual
Power On
Keep pressing power button over 2 seconds, device will start up opening screen, Android system is activating and enter the main
screen.

Sleep Mode

After devise is on, press power button once and it goes to sleep mode. The screen is now on standby and under low battery
consumption. To wake up device, press one more time power button.
Power off and Forced Shut down
When you are not using the device, keep pressing power button over 2 seconds, the
screen will display "shut down", select "Yes" to power off unit completely.
If device is hanging, use a small pin to press Reset hole, it will forced shut down and the
device will power on again.

Operation of Touch Panel

Click -- Use finger or capacity panel pen to touch once, so as to select or activate function, or select menu or turn on applications.
5