Mounting Using Anchor Screws - D-Link DWL-6610APE Quick Installation Manual

Mounting Using Anchor
Screws
Installation
1. Place the plastic wall mounting ring on a wall
or ceiling.
2. Mark the points where you will insert the
screws. Take out the mounting ring.
3. Drill holes in the marked points and
plastic wall anchors.
4. Use the supplied screws to attach the mounting
ring to the wall.
5. Plug the CAT 5 cable into the LAN port on the
access point.
4  D-Link DWL-6610APE Quick Install Guide
6. To attach the access point to the mounting ring,
first locate the right side of the access point
that has a small lock symbol on it, and make
sure to line up this side with the side of the
mounting ring that has Open - Lock written
on it.
insert the
7. Twist clockwise to lock the access point onto
the ring. The lock symbol on the access point
must point directly to the Close text on the
mounting ring.