Encoder Interface; Temperature - gefran SIEIDrive EXP-D14A4F Instruction Manual

Encoder interface

Interface type ________________________________ optocoupled digital encoder
Standard inputs _______________________________ A+,A-,B+,B-,0+,0-
Additional input for encoder qualifier ______________ C1+,C1- (optocoupled)
Encoder power supply _________________________ +5V or 15V/24V, selectable
Voltage input range High level (on pin) ) (U
Voltage input range Low level (on pin) ) (U
Current input value (@ 5V, on pin) ________________ 10mA
Current input value (@ 15V, on pin) _______________ 8mA
Current input value (@ 24V, on pin) _______________ 13mA
Voltage (Current) value additional input for encoder qualifier
___________________________________________ 15 up to 30V (4.5up to 9mA)
No. encoder pulses ____________________________ 600 up to 9999
Max Frequency input __________________________ 150kHz

Temperature

Storage temperature: __________________________ -20°... +70°C (-68...+158°F)
Operating temperature: _________________________ 0°... +55°C (32...+131°F)
These temperatures are adequate to those of the drive, to which the card is connected.
18
) ______ 2.5V up to 5.25V (@5V)
High
) _______ <= 0.8V (@5V)
Low
—————— EXP-D14A4F ——————
input interface
9 up to26V (@15V/24V)
<= 1.6V (@15V÷24V)