General Data; Digital Inputs; Digital Outputs; Analog Inputs - gefran SIEIDrive EXP-D14A4F Instruction Manual

General data

I/O scan time _________________________________ 2ms
Internal power supply from the drive ______________ +5VDC, ±18VDC
N !
OTE

Digital inputs

Input type ___________________________________ Voltage/Optocoupled
Inputs no. ___________________________________ 8 (2 groups of 4 inputs)
0V connection ________________________________ different 0V for the groups
Voltage input value ____________________________ 15 up to 30V
Current input value ____________________________ 4.5 up to 9mA

Digital outputs

Output type __________________________________ open emitter/Optocoupled
Pull down __________________________________ 10 k Ω
Outputs no. __________________________________ 6
External power supply _________________________ 15 up to 30V
Output current ________________________________ 50mA max for any output
Output voltage _______________________________ Power supply less 1V @50mA

Analog inputs

Input type (differential) _________________________ Voltage or Current
Inputs no. ___________________________________ 2
Input voltage (con ingresso in tensione) ____________ ±10V
Current requirements (with Voltage ref in input) ______ <0.5mA
Input current (with current ref in input) _____________ 0 up to 20mA/4 up to 20mA
Bandwidth ___________________________________ 100Hz

Analog outputs

Output type __________________________________ Voltage
Outputs no. __________________________________ 2
Max Output voltage ____________________________ ±10V
Output current ________________________________ 5mA max
Bandwidth ___________________________________ 265Hz
The Drive TB can be used to supply 24VDC power. AVy 24VDC
supply maximum output = 120 mA total including Encoder, LAN,
EXP card and APC / DGFC. (or 350 mA without APC / DGFC)
—————— I/O Expansion card ——————
17