Stanley Fatmax SXPW2823K Instruction Manual page 9

Table of Contents

Advertisement

Available languages

Available languages

DANGER:
• Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust
contains carbon monoxide, an odorless and deadly gas.
• Risk of fluid injection and laceration. When using the high pressure setting, DO NOT
allow the high pressure spray to come in contact with unprotected skin, eyes or with
any pets or animals. Serious injury will occur.
WARNING: Do not allow the unit to run for more than two minutes
without the gun trigger being pulled. This could cause overheating and
damage to the pump. When the temperature inside the pump rises too
high, the thermal relief valve will open and release a spray of water from
the pump to lower the internal temperature. The valve will then close.
Connect
1
Garden Hose
to Pump
Thread the garden hose
to the pump inlet.
Connect Spray
4
Wand to Spray
Gun
Thread the spray wand into
the end of the spray gun.
QUICK START GUIDE
Connect High
2
Pressure Hose
to Pump
Thread the high pressure
hose to the pump outlet.
Connect QC
5
Nozzles to
Spray Wand
Pull quick connect cou-
pler back and insert
nozzle. Release quick
connect coupler and twist
nozzle to make sure it
is secure in coupler.
9 - ENG
Connect High
3
Pressure Hose
to Spray Gun
Thread the other end of
the high pressure hose
to the spray gun.
Turn Water
6
Faucet
Completely On
Do not run the unit
without water supply
connected and turned on.
Use Cold Water Only.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents