AND SETTING THE TEMPERATURE CONTROL CONT'
(F)
Other Notes
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the
•
unit. If you attempt to restart before this time delay, the unit will not start.
When you use the unit for the first time or restart the unit after having been shut off for a long
•
time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and it is due to the length of the activation time.
Once the unit is running for a few hours it will automatically adjust.
(G)
How to Remove the Shelves
1.Open the door completely.
2.Make sure the shelf is pushed back completely.
3.Lift either the left or right side of the shelf creating a 45◦ angle from its original position.
Make sure not to lift either side of the shelf too fast as it may come in contact with the
4.Pull the shelf outward until it is removed from the inner compartment. You may
encounter some resistance from the shelf guard rail.
Fully open door
OPERATING YOUR COOLER
inner wall mount.
Removed shelf
10
Rotate shelf 45 degs
Pull the shelf
www.blazegrills.com
Need help?
Do you have a question about the BLZSSRF-15 and is the answer not in the manual?