Panasonic KX-HGW600 Operating Instructions Manual page 106

Operating Instructions
3.
When you have finished, click [Save]. The settings will be saved.
4.
Click [Restart Now!].
<Instructions for the data fields>
IP Address (LAN)
IP Address (LAN)
Subnet Mask
Port No. of WWW
Server
DHCP
When you use the DHCP server function, the KX-HGW600 can assign an IP address
automatically to each device on the LAN side.
DHCP Server
Available
Address Range
106
Enter the IP address on the LAN.
(The default setting is "192.168.0.254".)
The IP address must be entered out of the Available Address
Range in the DHCP setting.
Enter the Subnet Mask on the LAN.
(The default setting is "255.255.255.0".)
Enter the port number of the web server.
(The default setting is "80".)
This function enables the KX-HGW600 to assign an IP address
automatically to each device on the LAN side. (The default
setting is "Use".) To assign the IP address manually to each
device on the LAN side, check Do Not Use. In this case, the
Automatic Setup function does not work.
When you use the DHCP server function, enter the range of the
private IP addresses, 32 to 128 addresses. Change them only
when necessary. The last 16 addresses (default setting:
192.168.0.113-192.168.0.128) of 128 addresses are reserved for
Network Camera. Enter the value greater than "192.168.0.32".