Table of Contents
Advertisement
OperatIng the product
End of programme
C
When the programme you have
selected comes to an end, an
audible warning signal will warn
you to turn off your machine.
This audible signal will warn you
with certain intervals before it
turns off.
Start / Pause indicator will go off once the
washing programme has ended.
1.
Open the door of the machine.
2. Press the On/Off key to switch off your
machine.
3. Close the tap.
4. Unplug the machine from the socket.
C
For energy saving, the machine
is automatically switched off
following the completion of
the programme or when the
programme is not started.
C
Leave your dishes in the
machine for about 15 minutes
after they are washed in order
to have them cooled. Your
dishes will dry in a shorter time
if you leave the door of your
machine ajar during this period.
This process will increase the
drying effectiveness of your
machine.
34
/43 EN
Water Cut-off Warning
If mains water is cut off or water inlet tap
is turned off, the machine will not take
water in and water off indicator will flash.
As long as the problem continues, washing
programme is paused and the water inlet
is checked regularly by the machine; when
the water is restored water off indicator will
disappear after a while and the washing
programme resumes.
Overflowing Warning
If the machine intakes too much water or
there is leakage at any of the components
then the machine will detect this and
water overflow indicator will flash on
the Programme indicator. As long as the
overflowing continues safety algorithm will
be active and try to discharge the water. If
overflowing stops and safety is assured,
water overflow indicator will disappear. If
the indicator does not disappear, there is a
permanent fault. In this case the authorised
service should be contacted.
Dishwasher / User's Manual
Advertisement
Table of Contents
