INITIAL USE
Test strip
Display
number/colour
of the bars
1
4 green bars
2
1 red bar
3
2 red bars
4
3 red bars
5
4 red bars
Type
Very soft water
Soft water
Rather hard water
Hard water
Very hard water
All the start-up settings are now set and the display will show the
standby screen. The appliance is now ready for use.
The language, time, date and water hardness can be adjusted in the
settings menu (see 'Settings menu' chapter). The settings menu can be
opened from the start display via the 'Plus' menu.
Standby display
The standby display will show the time, date, cavity temperature (if
this is higher than 80 °C) and the timer (if set). The appliance goes to
standby mode after:
• Turning the function knob to 0 ('off' position).
• Touching the stop key multiple times (deeper in the menu).
Off mode
• Default the appliance will shut down after no action for a set time of
30 minutes.
• Touch and hold the stop key to shut down the appliance manually.
Switching on the appliance
• Touch and hold the stop key to switch on the appliance.
• The appliance can also be switched on by turning the function knob
to a function.
French
PPM
hardness (°df)
0 - 90
0 - 9
90 -178
9 - 18
178 - 267
18 - 26
267 - 356
26 - 35
> 356
> 35
03
05
2015
•
•
12 : 00
German
hardness (°dH)
0 - 5
5 - 10
10 - 15
15 - 20
> 20
EN 15