Preparation - ABB SWIFTI CRB 1100 Get Started Manual

02 Step 1 | Preparation
—
Preparat on
—
Th ngs to know before gett ng started
IMPORTANT- The weight of the CRB 1100 robot is 21.1 kg. To
ensure safe installation, we recommend that a trained
person, with knowledge of mechanical and electrical
installation/maintenance/repair work, assembles this
cobot.
You also need:
- Wrenches or hex key fits for M3, M4 and M12 screws
- A 0.4mm (or smaller) and a 1.4mm slotted screw drivers
- A table with holes for fixing M12 screws and locating pins.
Holes for pins and screws (size: mm)