en Troubleshooting
Fault
Food remnants are left on
tableware in the top basket.
Remnants of food on table-
ware.
48
Cause
Tableware in the top basket
was placed too close to-
gether or top basket is over-
filled.
Tableware is placed too
close together or basket is
overfilled.
Spray arm rotation is
blocked.
Spray arm nozzles are
blocked.
Filters are soiled.
Filters are inserted incor-
rectly and/or not engaged.
Washing programme selec-
ted too weak.
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
Tall narrow receptacles in
corner areas are not rinsed
adequately.
Top baskets on right and left
are not set to same height.
troubleshooting
Arrange tableware in the top basket
▶
with sufficient space in between.
Position large items of tableware at
an angle, e.g. pans and ovenproof
dishes.
Activate the Extra Clean Zone
‒
function in the top basket.
→ "Selecting Extra Clean
Zone", Page 24
Arrange tableware with sufficient
1.
space in between.
The spray jets must reach the sur-
faces of the tableware.
Avoid points of contact.
2.
Arrange tableware so that it does
▶
not obstruct spray arm rotation.
Clean the "Spray arms" → Page 43.
▶
Clean the filters.
▶
→ "Cleaning filters", Page 42
Insert the filters properly.
1.
→ "Filter system", Page 42
Engage the filters.
2.
Select a more intensive washing
▶
programme.
→ "Programmes", Page 18
Only remove large remnants of food
▶
and do not prerinse tableware.
Do not position tall narrow recept-
▶
acles at too great an angle or in
corner areas.
Set the top baskets on the left and
▶
right to the same level.
→ "Top basket", Page 21