Preparing A Dvd Writer (Cu-Vd50); Creating A Disc - JVC GZ-R18 Detailed User Manual

Preparing a DVD Writer (CU-VD50)

1
Open the terminal cover.
2
Connect the USB cable and the AC adapter of the DVD writer.
Before making any connection, close the LCD monitor to turn off this
0
unit.
.
A Connect the USB cable provided with the DVD writer to the USB
conversion cable provided with this unit to connect to this unit.
B Connect the AC adapter of the DVD writer.
Turn on the DVD writer.
0
Refer also to the instruction manual of the DVD writer.
0
3
Open the LCD monitor.
.
This unit turns on and the "BACK-UP" menu appears.
0
While the USB cable is connected, the "BACK-UP" menu is
0
displayed.
4
Insert a new disc.
.
A Press the eject button.
B Pull out the disc tray.
C Pull out the tray completely and load a new disc properly.
D Push the disc tray in until it clicks into place.
Caution :
Be sure to turn off the power when connecting the devices.
0
Otherwise, electric shocks or malfunctions may occur.
Memo :
All buttons on the DVD writer CU-VD50, other than the power and eject
0
buttons, will not work when connected to this unit.

Creating a Disc

Caution :
You cannot create a disc if the remaining battery power is not enough.
0
Charge this unit fully beforehand.
1
Prepare a DVD writer.
Insert a new disc into the DVD writer.
0
"Preparing a DVD Writer (CU-VD3)" (A p. 72)
"Preparing a DVD Writer (CU-VD50)" (A p. 73)
2
Copy files to the disc with the following methods.
"Copying All Files" (A p. 74)
"Copying Selected Playlists" (A p. 75)
"Copying Selected Files" (A p. 76)
Copying
73