Program Play - Panasonic SC-EN5 Operating Instructions Manual

Repeat play and random play
CL CLOCK CK TIMER TIMER
TIMER ADJ TIMER ADJ ON/OFF ON/OFF
DISPLAY AY DISP SLEEP SLEEP PGM/ PGM/–CLEAR CLEAR
EQ EQ LIVE VIRTUALIZER LIVE VIRTUALIZER PLAY MODE PLAY MODE
AUX AUX TUNER/BAND TUNER/BAND CD CD
TUNING MODE TUNING MODE
VOLUME VOLUME
Remote control only
1
Press [PLAY MODE] before play to select the desired
play mode.
Every time you press the button:
1- RND
To repeat just one track:
Press [PLAY MODE] to select " 1-
To repeat all tracks:
Press [PLAY MODE] to select "
To start random play:
Press [PLAY MODE] to select " RND ".
All tracks on the loaded CD will be played in random order.
Playback will stop automatically when all tracks have been played.
2
Press [CD :/J] to start play.
To cancel repeat play and random play
Press [PLAY MODE] to select "(off)" during stop, as shown in the
illustration in step 1 above.
Repeat play and random play will also be cancelled by opening the
CD lid.
To repeat programmed tracks
1 Program desired tracks (steps 1 to 5 on page 9).
2 Press [PLAY MODE] to display "
3 Press [CD :/J] to begin play.
Note
•
You can also turn the repeat mode on/off during CD play.
•
Random play does not work when "
hold [PGM/–CLEAR] first).
•
Search can be done within the track in play only.
PGM/–CLEAR
1
2
(off)
".
".
".
" is displayed (press and
PGM

Program play

CL CLOCK CK
TIMER ADJ TIMER ADJ
DISPLAY AY DISP SLEEP SLEEP PGM/ PGM/–CLEAR
EQ EQ LIVE VIRTUALIZER LIVE VIRTUALIZER PLAY MODE
AUX AUX TUNER/BAND TUNER/BAND
TUNING MODE TUNING MODE
VOLUME VOLUME
This function allows you to program up to 24 tracks.
Remote control only
Preparation: Press [CD :/J] and then [L].
1
(In the stop mode)
Press [PGM/–CLEAR].
2 [g/ ∂ ∂ ∂ ∂ ∂ ] or [µ µ µ µ µ / f]
Press
to play in the desired sequence.
3
Press [PGM/–CLEAR] again.
4
Repeat steps 2 and 3 until you have programmed all
the tracks you want.
5
Press [CD :/J].
Play will start in the programmed sequence.
Play will stop automatically when all the programmed tracks have
been played.
The program remains intact even if play is stopped or the unit is
turned off. "P" appears when play is stopped to indicate the
contents are in the memory.
To cancel program play mode
Press and hold [PGM/–CLEAR] in the stop mode until "CLEAR" is
displayed.
The mode is also canceled if the CD tray is opened.
This will also erase the entire program.
A When "– –:– –" is displayed
Total play time of the programmed tracks equals, or exceeds 250
minutes.
Tracks can still be programmed and played.
B When "PGM FULL" appears
The number of programmed tracks is limited to 24. No further
tracks can be programmed.
C Check program contents
1 Press [L].
"P" is displayed.
2 Press [PGM/–CLEAR], then press either [g/∂] or [µ/f].
Every time you press one of the buttons, the track and program
No. are shown on the display.
Add to the program
In the stop mode, repeat steps 2 and 3.
Note
•
Program play does not work when "RND" is displayed
(press [PLAY MODE] to clear it) (A page 9).
•
Search can be done within tracks only.
TIMER TIMER
ON/OFF ON/OFF
CLEAR
1 3
PLAY MODE
5
CD CD
2
to select the track you want
9
RQT6734