Safety 1st TrustView MO079AR User Manual page 4

• Place Baby Unit at least 3 feet (0.9 m) away from your baby.
• To reduce audio feedback, position both Parent and Baby Unit far enough away
from each other to avoid interference. Turning the volume down will help.
• This monitor has indoor/outdoor range. During use of the monitor, if the sound
quality deteriorates, you may be reaching the limits of the monitor's range.
If this happens, you will need to move Parent Unit closer to Baby Unit.
You can verify by checking the Link Indicator icon displayed in the data display,
(See page 10.)
• Adjust the volume to a comfortable level for your environment.
• Day/Night Auto Viewing lets you see the baby in a darkened room. The video
display during this time is in black and white. For best view of your baby in a
dark room, increase brightness control until desired brightness is achieved.
• Baby Unit can also be wall mounted. (See page 12.)
More Features, More Functions
Once you've set up your monitor and powered On, it's time to learn about the
innovative parent convenience features your monitor has to offer. Keep reading to
explore these many features:
• Zoom • Video On/Off (to conserve battery life)
• Brightness Control • Day/Night Auto Viewing
6
IMPORTANT:
Audio Parent Unit will not operate unless rechargeable battery pack is
installed first.
To maximize battery life, charge a new rechargeable battery pack in Parent
Unit for 12+ hours before first use. You may operate Parent Unit with an AC
adapter while charging batteries.
1 Remove protective clings from
both Parent Unit and Baby Unit.
WARNING!
Strangulation Hazard - Children have STRANGLED
in cords. Keep cords out of reach of children more
than 3 feet (0.9 m) away.
Plug in
here
Plug in here
3 Connect AC adapter to the
Parent Units (Video and Audio).
Power On/Off
Button
5 Hold down Power On/Off Button
to turn Parent Units on (Video and
Audio). To turn off Parent Units, hold
down Power On/Off Button again.
For more help and resources, call 1-800-544-1108 or visit www.safety1st.com
Plug in here
(back of unit)
2 Connect AC adapter to the
back of Baby Unit.
4 Plug Parent Unit and plug Baby
Unit into wall to operate AC power.
Power On/Off
Button
6 Hold down Power On/Off Button
to turn Baby Unit on.
To turn off Baby Unit, hold down
Power On/Off Button again.
7