Page 2
WARNING IMPORTANT SAFETY INSTRUCTION PLEASE READ THE FOLLOWING WARNINGS AND ALL ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE USING THE S.T.A.R. DIGITAL MONITOR. TERMS USED IN WARNINGS: The term “Receiver” corresponds to “Parent’s Unit” and the term “Transmitter” corresponds to “Baby’s Unit” in the rest of this instruction booklet.
items placed upon or against them, paying particular attention to cords at AC adapter plugs, wall plugs, and the point at which the cords attach to the Transmitter and Receiver. • This product should be serviced only by qualified service personnel at Dorel Juvenile Group when: - An AC adapter or its plug is damaged, - The Transmitter or Receiver have fallen,...
• Do not return this product to the place of purchase. If any parts are missing, or if you are having difficulty using product visit our web site at www.safety1st.com, or call Consumer Relations at (800) 544-1108. Have the model number (08232) and date code (manufacturing date) ready before you call. The date code is located inside the battery compartment of the Parent’s Unit.
Parts Included Charging Parent’s Belt Rechargeable Baby’s Unit Adapter for User Guide Base (1) Unit (1) Clip (1) Batteries (2) Baby’s Unit (1) Features and Components Baby’s Unit Parent’s Unit (with 2 rechargeable batteries) Sound Lights Link Indicator Talk Button Night Light Volume Controls/Menu Scroll Power On/Off...
INSTALLATION INSTRUCTIONS Following information is given as part of safety requirements. Follow the instructions before first using your baby monitor. Installing Your Monitor Charge Batteries: Before using the Parent’s Unit separate from the charging base, you must charge the batteries. The Parent’s Unit may be used while charging by pressing the On button.
Page 7
Installing Your Monitor To Set Up the Baby’s Unit: CAUTION • When using batteries, check batteries regularly. Battery indicator will show one block and the icon will flash when the battery is almost empty and requires charging. DO NOT use monitor system in portable mode when batteries are low. WARNING •...
Operating Your Monitor To Use the Parent’s Unit and Baby’s Unit: Press and hold the On buttons on the Parent’s Unit and the Baby’s Unit (Figure 6). All LEDs will illuminate briefly, then the green On/Off Buttons “link” LED will blink (approximately 10 seconds) while the units establish a connection.
Page 9
Operating Your Monitor 7. Light On: To turn on, press the night light button on top of the Baby’s Unit. Press again to turn off. 8. Sensitivity: You can adjust the sensitivity of the Baby Unit’s microphone from the Parent’s Unit. For example, if your baby is a particularly quiet sleeper, you can increase the sensitivity levels so that you are sure to hear if baby becomes disturbed.
Troubleshooting Possible Cause Solution Problem Parent’s Unit or Baby’s Unit Unit is not turned on Push and hold the On/Off button for 1 second, then release Link LEDs do not illuminate Batteries are dead Return Parent’s unit to charging base Baby’s Unit AC Adapter not Check AC Adapter jack-to-socket properly connected or batteries are...
One-Year Limited Warranty Dorel Juvenile Group, Inc. warrants to the original purchaser that this product (S.T.A.R. Digital Monitor), is free from material and workmanship defects when used under normal conditions for a period of one (1) year from the date of purchase. Should the product contain defects in material or workmanship Dorel Juvenile Group, Inc., will repair or replace the product, at our option, free of charge.
Page 13
ADVERTENCIA INSTRUCCIONES DE SEGURIDAD IMPORTANTES POR FAVOR, LEA DETENIDAMENTE LAS SIGUIENTES ADVERTENCIAS Y TODAS LAS INSTRUCCIONES DE ARMADO ANTES DE UTILIZAR EL MONITOR DIGITAL S.T.A.R.. TÉRMINOS USADOS EN LAS ADVERTENCIAS: El término “Receptor” corresponde a la “Unidad de los padres” y el término “Transmisor” corresponde a la “Unidad del bebé”...
Page 14
• Coloque los cables de los adaptadores de CA de manera que no se camine sobre ellos, ni queden apresados por objetos que se coloquen sobre o junto a ellos, prestando especial atención a los cables de los enchufes de los adaptadores de CA, tomacorrientes de pared, y el lugar en el que los cables se unen el transmisor y receptor.
Relaciones con el Consumidor, (800) 544-1108. Antes de llamar, tenga a mano el número de modelo (08232) y el código de fecha (fecha de fabricación). El código de fecha se encuentra dentro del comparti- mento de las baterías de la unidad de los padres.
Piezas incluidas Base de carga Unidad de Clip para Baterías Unidad del Adaptador para la Guía del los padres cinturón recargables bebé (1) unidad del bebé usuario (1) Características y componentes Unidad Unidad de los padres del bebé (con 2 baterías recargables) Indicador Link (Enlace) Luces de sonido Luz de noche...
Page 17
INSTRUCCIONES DE INSTALACIÓN La siguiente información se provee como parte de los requisitos de seguridad. Antes de utilizar el monitor para el bebé por primera vez, siga las instrucciones correspondientes. Cómo instalar el monitor Cargue las baterías: Antes de utilizar la unidad de los padres en forma separada de la base de carga, es preciso cargar las baterías.
Page 18
Cómo instalar el monitor Para instalar la unidad del bebé: PRECAUCIÓN • Cuando use baterías, verifique su funcionamiento con regularidad. Cuando la batería esté casi vacía y requiera ser cargada, el indicador de batería mostrará un bloque y el icono parpadeará. NO utilice el sistema de monitor en modo portátil cuando las baterías estén bajas.
Page 19
Cómo hacer funcionar el monitor Para utilizar la unidad de los padres y la unidad del bebé: Mantenga oprimidos los botones de encendido de la unidad de los padres y la unidad del bebé Botones de (Figura 6). Todos los indicadores LED se iluminarán encendido brevemente, y luego el LED de “enlace”...
Page 20
Cómo hacer funcionar el monitor 2. Indicador de encendido de luz de noche: Para encender la luz de noche desde la unidad del bebé, oprima el botón de luz de noche que se encuentra en la parte superior de dicha unidad. Para apagar la luz de noche, vuelva a oprimir el botón.
Solución de problemas Solución Causa posible Problema Mantenga presionado el botón de Los LED de “enlace” de la La unidad no está encendida encendido por un segundo, y luego unidad de los padres o la suéltelo unidad del bebé no se iluminan Las baterías están totalmente agotadas Vuelva a colocar la unidad de los padres en...
Garantía limitada de un año Dorel Juvenile Group, Inc. garantiza al comprador original que este producto (Monitor digital S.T.A.R.) estará libre de defectos de material y mano de obra cuando se utilice bajo condiciones normales durante un periodo de un (1) año a partir de la fecha de compra. Si el producto tuviese defectos de material o mano de obra, Dorel Juvenile Group, Inc.
Need help?
Do you have a question about the 8232 and is the answer not in the manual?
Questions and answers