Palit 945GC1066 Manual page 9

Con
necting 20/24-pin power cable
Users please note that the 20-pin and 24-pin power cables can both be con-
nected to the PWR1 connector. With either type of power cable, just align
the power cable with the pin 1 of the PWR1 connector. However, using 20-
pin power cable may cause the system to become unbootable or unstable
because of insufficient electricity. A minimum power of 300W is recom-
mended for a fully-configured system.
20-pin power cable
24-pin power cable
Installing the Motherboard
With ATX v1.x power supply, users please
note that when installing 20-pin power cable,
the latch of power cable clings to the left
side of the PWR1 connector latch, just as
the picture shows.
With ATX v2.x power supply, users please
note that when installing 24-pin power cable,
the latch of power cable clings to the right
side of the PWR1 connector latch.
7