Palit 945GC1066 Manual page 24

1st/2nd/3rd Boot Device
Use these three items to select the priority and order of the devices that your system
searches for an operating system at start-up time.
Removable Drives (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc.
Removable Drives
1st Drive
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F7:Previous Values
Press <Esc> to return to Advanced BIOS Features page.
Boot Other Device (Enabled)
When enabled, the system searches all other possible locations for an operating system if
it fails to find one in the devices specified under the First, Second, and Third boot devices.
Quick Power On Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start up
faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
Bootup Num-Lock Status (On)
This item defines if the keyboard Num Lock key is active when your system is started.
APIC Mode (Enabled)
This item allows you to enable or disable the APIC (Advanced Programmable Interrupt
Controller) mode. APIC provides symmetric multi-processing (SMP) for systems, allowing
support for up to 60 processors.
BIOS Setup
Removable Drives
[1st FLOPPY DRIVE]
F8:Fail-Safe Defaults
22
Item Help
Specifies the boot
sequence from the
available devices.
F9:Optimized Defaults