Table of Contents
Advertisement
Turning the unit on
Press MUTE/PWR (POWER/
Note
When you insert the CD in the CD slot, the unit turns on.
Turning the unit off
Press and hold MUTE/PWR (POWER/
Insert a disc
1 Press
to open the control panel.
2 Draws the disc, and starts playback automatically.
Eject a disc
Press
to open the control panel. The disc automatically ejects from the loading slot.
When the disc is ejected by pressing
10 seconds unless you pull out disc from the unit.
Selecting a source
Press SOURCE repeatedly to select a source.
The indicator lights up in the following order. TUNER → CD → AUX → TUNER...
Note
You cannot select a source if is not ready.
Adjusting the volume
Rotate MUTE/PWR (Press VOLUME
Note
When you turn the unit off, the current volume level is automatically memorized. Whenever
you turn the unit back on, it will operate at the memorized volume level.
Mute
1 Press MUTE/PWR (POWER/
2 To cancel it, press again.
Checking the clock
You can see the clock pressing DISP (DISP. on the remote control).
Basic operation
on the remote control) or any other button.
on the remote control).
during playback, it will be loaded automatically after
on the remote control) to adjust the sound level.
on the remote control) to cut the sound.
11
Advertisement
Table of Contents
