Step 4 Ac Power Supply Cord Connections; Step 5 Preparing The Wireless System; Step 6 Preparing The Remote Control - Panasonic SC-PT770 Operating Instructions Manual

step 4 AC power supply cord connections
Wireless system
AC IN
Ferrite core
To
household
AC outlet
AC power supply cord
(included)
Conserving power
The main unit and the wireless system consume a small amount of
power when they are turned off (\U.S.A.[and\Canada] main unit: approx.
0.1 W, wireless system: approx. 0.2 W, \Others] main unit: approx. 0.2 W,
wireless system: approx. 0.3 W). To save power when they are not to be
used for a long time, unplug them from the household AC outlet.
You will need to reset some memory items after plugging in the main
unit.
step 5 Preparing the wireless system
Turn on the wireless system after all connections are complete.
POWER
WIRELESS LINK
Wireless system
step 6 Preparing the remote control
Batteries
Insert so the poles ( and ) match those in the remote control.
R6/LR6, AA
Replace the cover.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
≥ Use alkaline or manganese batteries.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
[For\areas\except\U.S.A.[and\Canada]
Before connecting the AC power
supply cord
Set the voltage.
Use a flat-head screwdriver to move the
voltage selector to the appropriate position
for the area in which this system is used.
≥ If the AC plug does not fit
your household AC outlet
Use the AC plug adaptor
(included).
If it still does not fit, contact an electrical
parts distributor for assistance.
Press [POWER C I, B Í] on the wireless system.
Unit on/off button [POWER C I, B Í]
Use this button to turn the wireless system on and off.
C I: The wireless system is on.
B Í: The wireless system is off.
WIRELESS LINK indicator
Red: The wireless system is on and the wireless link is deactivated.
Green: The wireless system is on and the wireless link is activated.
(" [W1] " is also displayed on the main unit's display.)
Press in and lift up.
VOLT ADJ
110 127V 220 240V
[Note]
The included AC power supply cords are for use with the main unit and
wireless system only. Do not use them with other equipment. Also, do
not use cords for other equipment with the main unit or wireless system.
Do not:
≥ mix old and new batteries.
≥ use different types of batteries at the same time.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
Use
Aim at the remote control signal sensor (
maximum range of 7 m (23 ft) directly in front of the unit.
Main unit
AC IN
To
household
AC outlet
AC power
supply cord
(included)
39), avoiding obstacles, at a
11