Table of Contents
Advertisement
1
step
Assembling the speakers
Preparation
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥ For assembly, use a Phillips-head screwdriver.
≥ For optional wall mount, refer to page 6.
[PT754] : Front speakers
Make sure you have all the indicated components before starting assembly, setup, and connection.
2 Front speakers
Pipe
1
Thread the
cable through
the base.
Base
Pull and press the
cable into the groove.
2
Attach the
pipes to the
speaker.
Pipe
∫ Preventing the speakers from falling
≥ You will need to obtain the appropriate screw eyes to match the
walls or pillars to which they are going to be fastened.
≥ Consult a qualified housing contractor concerning the
appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.
4
2 Set of pipes (with cable):
For front speakers
1
Join the pipes.
Cable
2
Match these holes when
Pipe
you insert the pipe.
Slide into the groove.
3
Cable
1
Speaker
2 Bases
2
Tighten securely.
Small
screws
4
Tighten
securely.
Tighten securely.
3
Screws
e.g. [PT754] Front speakers
Rear of the speaker
8 Screws
4 Small screws
Screws
Phillips-head
screwdriver
(not included)
4
Insert the wire
fully.
i: White
j: Blue
5
Press into
the groove.
String (not included)
Thread from the wall to the speaker and tie tightly.
Screw eye
(not included)
Push!
Approx.
150 mm
Wall
z)
29
(5
/
32
Hide quick links:
Advertisement
Table of Contents
