To Be Able To Operate This Unit From A Computer On The Home Network - Panasonic DMR-E500HS Operating Instructions Manual

5
STEP Setting up the Network
Refer to the control reference on page 16.
To be able to operate this unit from a
computer on the Home Network
When connecting a computer via a router with its
DHCP enabled
Confirm "TCP/IP Settings" is set to "Automatic (DHCP)"
( page 16, step 6).
The settings on page 18–19 are not required.
When connecting a computer via a router with its
DHCP disabled
Please confirm the following were carried out correctly.
1 Check the computer's IP address (
2 Enter the DVD recorder's IP address manually (
RQT7394
18
right, step 4).
page 19).
To check the computer's IP address
On the computer
1
Click [start] [Control Panel].
Double-click [Network Connections].
2
Right-click the [Local Area
§
Connection] icon and click
[Properties].
§
A message may appear below the icon such as [Bridge
Connections] or [Network Bridge].
3
Select [Internet Protocol (TCP/IP)]
and click [Properties].
4
Check the IP address setting.
Please make a note of the "IP address", "Subnet mask",
"Default gateway" and "Preferred DNS server" settings
(These will be needed during DVD recorder setting).
5
Click [Cancel].
You will exit the "Internet Protocol (TCP/IP) Properties"
window.
6
Click [Cancel].
You will exit the "Local Area Connection Properties" window.
≥Screen shots reprinted by permission from Microsoft Corporation.