Product Features - Panasonic Nanoe X F-PXU70M Operating Instructions Manual

SETTING AND OPERATING REQUIREMENTS
Do not place obstacles on the product
air inlet and outlet.
(Otherwise it may affect product performance.)
Do not use the same power socket
with TV, radio, etc.
(Otherwise, visual disturbances or noises may
be caused.)
In this case, insert the power plug into another
→
power socket.

PRODUCT FEATURES

The efficient "HEPA composite filter" brings you
fresh and clean air
The gas pollution level display keeps you updated with the indoor gas
pollution level.
The PM2.5 concentration reading display keeps you updated with the
indoor PM2.5 pollution level.
With the nanoe
About nanoe TM
The so-called nanoe
generated by applying high voltage to separate water molecules.
nanoe TM X features: high moisture content, small particles,
1. High moisture content (the moisture content is 1,000 times
the moisture content of ordinary anions).
2. Small particles (about 5 nm - 20 nm (nanometers) in size, able to penetrate deep into the fiber
and stratum corneum).
3. High stability (6 times more stable than a common ion, covering a distance of 10 m
or above).
4. More hydroxyl radicals (up to 4,800 billion of radicals are generated per second).
5. Weak acidity (with weak acidity features close to that of hair and skin).
All of the above features have been tested by SGS-CSTC Standards Technical
Services Co., Ltd.
Note: nanoe TM and the nanoe
nanoe TM X are particulate ions containing hydroxyl radicals whose amount is 10 times that
of nanoe TM .
TM X technology
X
TM X are charged water purification particles
high stability, etc.
TM mark are trademarks of Panasonic Corporation.
Install the product in a place
without any obstacles on the left,
right, top and back of the product.
(Otherwise, it is difficult for the product to
inhale pollutants, or the airflow may be
blocked and cannot be discharged smoothly.)
Do not place the product on an
unstable or uneven surface.
(Otherwise, vibration may be caused.)
5