Table of Contents
Advertisement
Recording television programs
Refer to the control reference on page 16.
Flexible Recording
[HDD] [RAM] [DVD-R]
The unit sets the best possible picture quality that fits the recording
within the remaining disc space.
e.g.,
Recorded
Remain
45 minutes in
SP mode
60 minutes
Program to be recorded
Preparation
≥Select the channel to record.
≥Press [HDD] or [DVD] to select the recording drive.
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4, 2, 1] to select
"FLEXIBLE RECORDING" and press
[ENTER].
FLEXIBLE REC
Record in FR mode
Maximum rec time
3 Hour 00 Min.
Set recording time
3 Hour 00 Min.
Start
Cancel
3
Press [2, 1] to select "Hour" and
"Min." and press [3, 4] to set the
recording time.
≥You can also set the recording time with the numbered
buttons.
≥You cannot record more than 8 hours.
4
When you want to start recording
Press [3, 4, 2, 1] to select "Start"
and press [ENTER].
≥Recording starts.
≥The recording mode becomes FR mode.
To exit the screen without recording
Press [RETURN].
To stop recording partway
Press [∫].
To show the remaining time
Press [STATUS].
RQT7305
18
Perfectly fit!
Recording rate
between SP and LP
DVD-RAM
Remaining
REC 0:59
time
CH71
Stereo
Recording from a video cassette
recorder
[HDD] [RAM] [DVD-R]
Preparation
≥Connect a video cassette recorder to this unit's input terminals.
≥Press [HDD] or [DVD] to select the recording drive.
[Note]
When recording using this unit's input terminals, only the sound
received at the time of recording will be recorded.
As long as secondary audio that is recorded on the video cassette is
not output on the unit in play, it is not recorded.
e.g.: Connecting to the L2 input terminals
POWER
PULL OPEN
L2
S-VIDEO IN
VIDEO IN
L/MONO
AUDIO IN
R
S-VIDEO IN
VIDEO IN
Yellow White Red
S-Video
§
cable
Other video equipment
If the audio output of the other equipment is monaural, connect to L/
MONO.
§
The S-VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
1
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to L2 input terminals, select "L2".
2
Press [REC MODE] to select the
recording mode (XP, SP, LP or EP).
≥Using Flexible Recording (
video cassette to 1 disc with the best possible quality of
recording without wasting disc space.
3
Start play on the other equipment.
4
Press [¥ REC].
Recording starts.
To skip unwanted parts
Press [;] to pause recording. (Press again to restart recording.)
To stop recording
Press [∫].
Almost all videos and DVD software on sale have been
treated to prevent illegal copying. Any software that has
been so treated cannot be recorded using this unit.
OPEN/CLOSE
REC
TIME SLIP
HDD
DVD
DRIVE SELECT
x
/
1.3
TIME SLIP
CH
L/MONO - AUDIO IN - R
Audio/Video cable
left), you can save content of a
Advertisement
Table of Contents
