Setup Menus; Set Channels Automatically; Set Channels Manually - Panasonic DMR-EZ28K Operating Instructions Manual

Setup Menus

"Accessing the Setup Menus"
You will have to perform the following step 1 for all
other operations on pages 46-55.
With the unit stopped
Notes
Changed settings remain intact even when switching the unit to standby.
Tips
To return to the previous screen
Press [RETURN]. Even if you have changed an option, the change is
not activated until you press [OK].
To exit the screen
Press [SETUP].

Set Channels Automatically

The channels are automatically set.
Select to suit the type of antenna you are using.
Perform step 1 of "Accessing the Setup Menus" (➔ above).
e , r to select "Channel" then q
e , r to select "Set Channels
Automatically", then
e , r to select "Antenna" or "Cable",
then
– When a TV (VIERA) supporting HDAVI
Control 3 is connected via an HDMI cable,
the following options will be displayed.
[Set Channels via VIERA Link] You can
acquire the VIERA setting information.
[Set Channels without VIERA Link]
to complete.

Set Channels Manually

The captions you select or modify are used as channel
names and displayed on the Direct Navigator screen.
Perform step 1 of "Accessing the Setup Menus" (➔ above).
e , r to select "Channel", then q
e , r to select "Set Channels
Manually", then
e , r to select channel.
– You can also select channels with the
numbered buttons.
– You can also press [ u , i ] to skip several lines.
46
RQT9046
Adding and Deleting Channels
To add channels, delete undesired channels, or
channels that have poor reception.
After selecting a channel (➔ left, step 4, "Set Channels
Manually")
w , q to select the "Add/Del" column.
e , r to select "Added" or "Deleted".
– After selecting the "Channel" column with
[ w , q ], repeat steps 4-6 to set other channels.
Setting favorite channels
You can define a Favorite list.
After selecting a channel (➔ left, step 4, "Set Channels
Manually")
w , q to select the "Favorite" column,
then
e , r to select the position on the
list, then
– After selecting the "Channel" column with
[ w , q ], repeat steps 4-6 to set other channels.
to complete.
Selecting the caption
After selecting a channel (➔ left, step 4, "Set Channels
Manually")
w , q to select the "Caption" column.
e , r to select the caption.
– After selecting the "Channel" column with
[ w , q ], repeat steps 4-6 to set other channels.