Change Thumbnail - Panasonic DMR-EZ28K Operating Instructions Manual

Setup Protection/Cancel Protection
Perform steps 1−4 of "Accessing the Recording View"
(➔ 36).
RAM
Use to prevent accidental erasure of recordings.
e , r to select "Setup Protection"
or "Cancel Protection", then
w to select "Yes", then
The lock symbol
appears when the
recording is protected.

Change Thumbnail

Perform steps 1−4 of "Accessing the Recording View"
(➔ 36).
RAM -R -R DL -RW(V) +R +R DL +RW
Changes the thumbnail picture shown in the
Recordings screen.
e, r to select
"Change Thumbnail", then
DIRECT NAVIGATOR Change Thumbnail
Video
DVD-RAM A
08
07 08 --
Change
*** 06
End
*** 06 1. 1. SUN *** 06 1. 1. SUN
Next
-- -- --
0:00.00
Change
Start play and select
the thumbnail position.
Previous --:--.-- Page 02/02 Next
ENTER
S SUB MENU Select
to start play.
at the point you want to
use as the thumbnail.
– To change the thumbnail:
Restart play and press [ e , r ] to select
"Change" then press [OK] at the point you
want to use as the thumbnail.
e , r to select "Exit", then
8
Tips
For quicker editing
• Use search (➔ 26), Slow-motion Play or Time Slip (➔ 27) to find the
desired point.
• To skip to the start or end of a recording, press [ u ] (start) or [ i ]
(end).
• For better precision, use Slow-motion Play and Frame-by-Frame
Viewing (➔ 27).
DIRECT NAVIGATOR Recordings
DVD-RAM
07 08
10 10/27 Mon 8 10/27 Mon
Picture
B
Exit
--
No. 0 9
Divide Recording
Perform steps 1−4 of "Accessing the Recording View"
(➔ 36).
RAM
Once divided, recordings cannot be recombined.
e , r to select "Divide Recording",
then
DIRECT NAVIGATOR Divide Recording DIRECT NAVIGATOR Divide Recording
A A Video Video
DVD-RAM DVD-RAM
08 08 Play Play
07 07 08 08 -- --
Preview Preview
*** 06 *** 06
Divide Divide
*** 06 *** 06 1. 1. SUN 1. 1. SUN *** 06 *** 06 1. 1. SUN 1. 1. SUN
Next Next
-- -- -- -- -- -- Exit Exit
0:00.11 0:00.11
Divide Divide
Previous Previous Page Page 02/02 02/02 Next Next
--:--.-- --:--.--
ENTER ENTER
S S SUB MENU SUB MENU Select Select
at the point you want to
divide.
– For quicker editing (➔ left, Tips )
– Selecting "Preview" then pressing [OK] plays
the recording from 10 seconds prior, to 10
seconds after the division point.
– To change the point to divide at:
Restart play and press [ e , r ] to select
"Divide" then press [OK] to bring to the point
where you want to divide.
e , r to select "Exit", then
w to select "Divide", then
8
– The recording is divided at that point.
Notes
• Divided recordings retain the name of the original.
• A short amount of video and audio just before and after the division
point gets cut out.
• You cannot divide a recording when the resulting parts are too short
or when the total number of recordings exceeds 99.
B B Picture Picture
No. No. 0 0 -- -- 9 9
37
RQT9046