Network Easy Setting - Panasonic DMP-BD75 Owner's Manual

Network Easy Setting

The configuration of your network is about to begin.
Follow the on-screen instructions and make
the settings with [3, 4, 2, 1] and press
[OK].
Network Easy Setting
The confirmation of a network connection and the
Internet functions' (BD-Live etc.) accessibility is
conducted.
Is a LAN cable already connected ?
Please refer to the operating instructions for how
to connect to with a LAN cable.
A broadband Internet connection is necessary for
BD-Live.
Press [OK] to proceed.
OK
RETURN
When you experience
problems with settings
Network Easy Setting
(Home Network Connection Check)
Network Easy Setting (Home Network Connection Check)
Complete.
1. LAN cable connection Fail
2. IP address setting Fail
3. Connection to gateway Fail
LAN cable is not connected.
Please check the connection.
Select "Yes" and press [OK] to check network
connection again. Select "No" and press [OK]
to finish Network Easy Setting.
Yes
OK
Display
1. LAN cable connection
2. IP address setting
3. Connection to gateway
1. LAN cable connection
2. IP address setting
3. Connection to gateway
1. LAN cable connection
2. IP address setting
3. Connection to gateway
No
Check the
following
Fail ≥ Connection of
the LAN
Fail
cables ( 9)
Fail
Pass ≥ Connection
and settings
Fail
of the hub
Fail
and router
Pass
≥ Settings of
Pass or
"IP Address/
Home
DNS
network
Settings"
available
( 24)
Fail
Network Easy Setting (Internet Connection Check)
Network Easy Setting (Internet Connection Check)
Complete.
- Connection to the Internet Fail(Error code: B019)
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the owner's manual for the cause of
the error and the solution for it.
Press [OK].
OK
Display
Cannot find the ≥ "Primary DNS" and "Secondary
server.
(Error code: B019)
≥ The server may be busy or the
Failed to connect to
the server.
(Error code: B020)
≥ Settings of "Proxy Server
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting "Network Easy Setting"
in the Setup menu. ( 24)
≥ You can redo these settings individually using "Network Settings".
( 24)
Reprogramming the remote
control
If you have more than one Panasonic player/recorder and
the remote control operates both products at once, you will
need to change the remote control code on one product to
prevent this occurrence. (
Check the following
DNS" settings of "IP Address/
DNS Settings" ( 24)
service may have been
suspended. Please wait a few
moments, and then try again.
Settings" ( 24) and the router
25, "Remote Control Code")
VQT3A92
11