Table of Contents
Advertisement
Initial settings
DISPLAY MENU
I Setting on screen DISPLAY
1
Press the SELECT (
2
Press the SELECT (
SETUP
DISPLAY
MENU LANGUAGE
ENGLISH
OSD POSITION
OSD MESSAGES
ENTER
RETURN
AUDIO MENU
I Setting AUDIO [DVD]
1
Press the SELECT (
2
Press the SELECT (
SETUP
AUDIO
DIGITAL AUDIO OUT
D. RANGE COMPRESS.
STANDARD
AUDIO DURING SRCH
ENTER
RETURN
52
,
) button to select DISPLAY menu .
,
) button to select each item and press ENTER button.
SETUP
MENU LANGUAGE
ENTER
RETURN
SETUP
OSD POSITION
POS 1
ENTER
ON
RETURN
SET UP
SETUP
OSD MESSAGES
OSD MESSAGES
ENTER
ENTER
RETURN
RETURN
•
To return to the previous screen, press RETURN button.
,
) button to select AUDIO menu .
,
) button to select each item and press ENTER button.
SETUP
DIGITAL AUDIO
OUT
OFF
BITSTREAM
ENTER
LPCM
RETURN
OFF
See next page
ON
See next page
•
To return to the previous screen, press RETURN button.
You can change the language used for the on screen display
menus.
ENGLISH
ENGLISH:
FRANÇAIS
FRANÇAIS: SELECTED as onscreen language.
ESPAÑOL
ESPAÑOL: SELECTED as onscreen language.
POS 1: Display appears at the position on the top side of the
screen.
POS 1
POS 2: Relative to "Position 1", the display appears at the
POS 2
bottom.
(Select this for example, when part of the display is
missing.)
This is used to turn the display of functions like "PLAY" and
"STOP" on or off.
ON
ON
ON: Functions like "PLAY" and "STOP" are displayed on
OFF
OFF
the television screen.
OFF: Functions like "PLAY" and "STOP" are not displayed
on the television screen.
Digital audio output setting
• This is for selecting the type of digital audio signal output from
the optical digital audio output terminal of this device,
according to the connection method with other equipment.
OFF: For analog connection of audio output ➠ Set to "OFF".
BITSTREAM: When connecting with digital equipment with a
LPCM: When connecting with digital equipment without a built-in
Dolby digital decoder or DTS decoder ➠ Set to "LPCM".
When playing back a DVD recorded at LPCM 96 kHz using 96 kHz
sampling, perform analog connection by setting to "OFF". Optical
digital output is not compatible in this case. (When "BITSTREAM" or
"LPCM" is selected, downsampling to 48 kHz is done for both optical
digital output and analog output.)
CAUTION:
• When performing digital connection with equipment without a
built-in Dolby digital decoder or DTS decoder, be sure to set
to "LPCM".
• If setting is not done correctly, noise will be generated, and
this may hurt your ears or damage speakers.
SELECTED as onscreen language.
built-in Dolby digital decoder or DTS decoder ➠
Set to "BITSTREAM".
Advertisement
Table of Contents
