Advertisement
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury by means of fire or
electric shock, we urge that our clients take some basic safety precautions when using this
device. Please read the operation instructions carefully and make sure you have understood its
content.
Always use a grounded power connection with the appropriate mains voltage. You can find the
corresponding mains voltage on the type plate. If you have any doubts about the connection being
grounded, have it checked by a qualified professional. Never use a faulty electric cable.
Do not open the compressor in a wet or damp environment or when you are wet yourself and protect it
from direct sunlight. Install this device in a safe location so that nobody can step on the cable, fall over
or damage it. Make sure additionally you provide sufficient cooling through the ambient air and avoid
heat accumulation. Disconnect the power plug before cleaning the airbrush compressor and use only
a damp cloth for cleaning. Avoid using cleaning agents and take care that no fluids penetrate into the
device.
The interior of the airbrush compressor contains no parts that can be inspected or serviced by the
user. Leave the maintenance, adjustment and repair to qualified technical personnel. In case of
unauthorised intervention the 2-year warranty is no longer valid! Keep this operation instructions safe.
Safety guideline
BEWARE:
The use of this device is allowed only with fault current protection switch with a triggering nominal
current up to 30mA (according to VDE 0100 Article 702 and 738).
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory and mental abilities or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or the follow the instructions, made by this person on how to
use the device correctly.
Children should be supervised to make sure that they do not play with the device.
ATTENTION:
•
The head of the compressor (with cooling fins) can get very hot.
•
Run a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
•
Use the device exclusively according to the intended purpose stated in the instructions for
use.
•
You are responsible for the safety of the working environment.
•
If the cable or the plug is damaged due to external influences the cable must not be repaired!
It has to be replaced with a new one. This work can be carried out only by an electrician.
•
The voltage indicated on the type plate of the device of 230 Volt alternating voltage has to
correspond to the existent mains voltage.
•
Never lift, carry or fixate the device by using the power cable.
•
Make sure that the electrical plug connection is placed in a flood-proof area and is protected
from moisture.
•
Disconnect the mains plug before starting the maintenance work at the compressor
•
The user is responsible for complying with the location specific safety and mounting
regulations (you can ask an electrician)
•
In case of device failure the repairs can be carried out only by an electrician or by the WilTec-
.
repair service
© by WilTec Wildanger Technik GmbH
http://www.wiltec.info
.
Seite 2
Advertisement
